jody muelaner

Journal Articles (7)

Muelaner, J.E., Z. Wang, and P.G. Maropoulos, Concepts for and Analysis of a High accuracy and High Capacity (HAHC) Aerospace Robot . IMechE, Part B: J. Engineering Manufacture, 2011, 255(8), p. 1393-1399
Maropoulos, P.G., P. Vichare, O. Martin, J.E. Muelaner, M. Summers, and A. Kayani, Early design verification of complex assembly variability using a hybrid - model based and physical testing - methodology. CIRP Annals - Manufacturing Technology, 2011. 60(1)

Muelaner, J.E., B. Cai, and P.G. Maropoulos, Large Volume Metrology Instrument Selection and Measurability Analysis. IMechE, Part B: J. Engineering Manufacture, 2010. 224: p. 853-868.
*SAGE Best Paper Award
Muelaner, J.E., Z. Wang, O. Martin, J. Jamshidi, and P.G. Maropoulos, Estimation of Uncertainty in Three Dimensional Coordinate Measurement by Comparison with Calibrated Points. Measurement Science and Technology, 2010
*Results given in this paper were obtained using the original Workspace software and a typical 4 transmitter setup. Further testing has shown that uncertainty may be reduced by using newer software versions, and more complicated configurations with more hardware.
Muelaner, J.E. and P.G. Maropoulos, Design for Measurement Assisted Determinate Assembly (MADA) of Large Composite Structures. Journal of the CMSC, 2010
Muelaner, J.E., Z. Wang, O. Martin, J. Jamshidi, and P.G. Maropoulos, Verification of the Indoor GPS System, by Comparison with Calibrated Coordinates and by Angular Reference. Journal of Intelligent Manufacturing, 2010.

Muelaner, J.E., Z. Wang, J. Jamshidi, P.G. Maropoulos, A.R. Mileham, E.B. Hughes, and A.B. Forbes, Study of the Uncertainty of Angle Measurement for a Rotary-Laser Automatic Theodolite (R-LAT). IMechE, Part B: J. Engineering Manufacture, 2008. 223(B3): p. 217-229

Hughes, B., A. Forbes, W. Sun, P.G. Maropoulos, J.E. Muelaner, J. Jamshidi, and Z. Wang, iGPS Capability Study, in NPL Report. 2010, NPL: Teddington.35, Q.s.C.P.a.C.o. HMSO

Muelaner, J.E., A. Kayani, O. Martin, and P.G. Maropoulos. Metrology Enhanced Tooling for Aerospace (META): Strategies for Improved Accuracy of Jig Built Structures. At SAE Aerotech 2011, Toulouse, France
Muelaner, J.E., A. Kayani, O. Martin, and P.G. Maropoulos. Measurement Assisted Assembly and the Roadmap to Part-To-Part Assembly. In: Proceedings of DET2011, 7th International Conference on Digital Enterprise Technology. 2011. Athens, Greece. p. 11-19
Muelaner, J.E. and P.G. Maropoulos. Integrated Dimensional Variation Management in the Digital Factory. In: Proceedings of DET2011, 7th International Conference on Digital Enterprise Technology. 2011. Athens, Greece. p. 39-46
Martin, O.C., J.E. Muelaner, Z. Wang, A. Kayani, D. Tomlinson, P.G. Maropoulos, and P. Helgasson. Metrology enhanced tooling for aerospace (META): A live fixturing Wing Box assembly case study. In: Proceedings of DET2011, 7th International Conference on Digital Enterprise Technology. 2011. Athens, Greece. p. 83-92

Muelaner, J.E., Z. Wang, and P.G. Maropoulos, Concepts for and Analysis of a High accuracy and High Capacity (HAHC) Aerospace Robot, in The 21st International Computer-Aided Production Engineering Conference. 2010: Edinburgh
Martin, O.C., J.E. Muelaner, and P.G. Maropoulos, The Metrology Enhanced Tooling for Aerospace (META) Framework, in The 36th International MATADOR Conference. 2010: Manchester, UK
Muelaner, J.E. and P.G. Maropoulos. Design for Measurement Assisted Determinate Assembly (MADA) of Large Composite Structures. in CMSC. 2010. Reno, Nevada
Cai, B., W. Dai, J.E. Muelaner, and P.G. Maropoulos. Measurability Characteristics Mapping for Large Volume Metrology Instruments Selection. In: Proceedings of the Advances in Manufacturing Technology - XXIII, 7th International Conference on Manufacturing Research. 2010. Warwick, UK. p. 438-442

Muelaner, J.E., B. Cai, and P.G. Maropoulos, Large Volume Metrology Instrument Selection And Measurability Analysis, in 6th International Conference on Digital Enterprise Technology. 2009: Hong Kong
Muelaner, J.E., Z. Wang, J. Jamshidi, and P.G. Maropoulos, Verification Of The Indoor Gps System By Comparison With Points Calibrated Using A Network Of Laser Tracker Measurements, in 6th International Conference on Digital Enterprise Technology. 2009: Hong Kong
*Results given in this paper were obtained using the original Workspace software and a typical 4 transmitter setup. Further testing has shown that uncertainty may be reduced by using newer software versions, and more complicated configurations with more hardware.
**Best Paper Award

Muelaner, J.E. and P.G. Maropoulos, Large Scale Metrology in Aerospace Assembly, in 5th International Conference on Digital Enterprise Technology. 2008: Nantes, France
Muelaner, J.E., Z. Wang, J. Jamshidi, P.G. Maropoulos, A.R. Mileham, E.B. Hughes, and A.B. Forbes, iGPS - An Initial Assessment Of Technical And Deployment Capability , in 3rd International Conference on Manufacturing Engineering. 2008: Kassandra-Chalkidiki, Greece. p. 805-810